3009 Windows NT failed to open the unattended install file '%1'.
3010 Windows NT failed to detect your modem(s).
3011 Windows NT has detected that your system has %1!d! ports.\n\nYou must restrict detection to a single port or specify modems in the Setup Information File.
3012 Windows NT was unable to add the modem '%1' to %2.
3013 Windows NT was unable to add the modem to %1.\n\n'%2' is not a valid modem description. Correct this problem in your Setup Information File.
3018 Modems
3019 Installs a new modem and changes modem properties.
3021 Looking for a modem...
3022 Found a modem.
3023 No modem found.
3024 Querying modem...
3025 Test
3026 The following modem was found on %1:
3027 Windows NT was unable to detect your modem. As an alternative, the following standard modem was set up on %1:
3028 If this modem type is not correct, click Change to select a different type from a list.
3029 If you know the manufacturer and model of your modem, click Change to select it from a list.
3030 Display Information and Test Modem Setup
3031 Detection complete.
3032 You have selected the following modem on %1:
3033 %s #%u
3036 Parallel cable on %s
3037 Serial cable on %s
3038 ModemDet.txt
3039 %s was in use by another program.\n
3040 %s couldn't be opened.\n
3041 A modem was found on %s:\n
3042 A modem was not found on %s.\n
3043 Modem ID = %s.\n
3044 %s
3045 = %s\n
3046 Install New Modem
3047 Click the manufacturer and model of your modem. If your modem is not listed, or if you have an installation disk, click Have Disk.
3048 Mode&ls
3049 Maximum DTE = %ld bps\n
3051 Windows NT detected a modem but was unable to add it because the Setup Information file is corrupt or cannot be found.
3052 Standard Modem
3053 The modem properties cannot be displayed because the modem is not available.\n\nRestart the system and try again.
3054 Properties for Modems
3055 You will need to restart the system before you can use the modem '%1'.
3056 There is already a modem like '%1' on %2.\n\nDo you still want to install this modem?
3057 Windows NT was unable to register the modem '%1' on %2.
3058 Windows NT detected the modem '%1' on %2 but was unable to register it.
3059 Checking modem...
3060 Are you sure you want to remove the modem '%1' from your system?
3061 Windows NT was unable to remove the modem '%1' from %2.
3062 Modem
3063 There is not enough memory to duplicate this modem.\n\nClose some programs and try again.
3065 You have selected to duplicate '%1'.
3066 Windows NT skipped installing this modem on the ports that already have modems installed.
3067 Windows NT has detected that your system has %1!d! ports. Rather than checking each port, Windows NT will check only one port for a modem.
3068 Windows NT was unable to add the modem.
3069 There is not enough memory to open the modem control panel.\n\nClose some programs and try again.
3070 You will need to restart the system before you can use this modem on the ports on which it was installed.
3071 Windows NT was unable to add the modem '%1' to %2 because some files for the modem could not be copied.
3072 Note: In this beta version of Microsoft Windows NT, you may need to reboot before any modems you installed become available. Also for this beta, if you are trying to configure modems for use by RAS, use the Network option in Control Panel.
3073 You must be a System Administrator to install a modem.
3074 No modems are installed. You must be a System Administrator to install a modem.
3075 Dial-up Networking needs to be configured because the list of installed modems has changed.\nWould you like to do this now?
3076 You must shut down and restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
3077 Network Settings Change
3078 Installing modem on %s...
3100 Unattended install failure: A modem was found but could not be installed.
3101 Unattended installation of modems has failed.\n\nPlease verify your Setup Information File.
3102 Unattended install failure: Could not read modem name from the Setup Information File.
3103 Unattended install failure: No port specified.\n\nPlease verify your Setup Information File.
3104 Unattended install failure: Specified port does not exist.\n\nPlease verify your Setup Information File.
3105 Unattended install failure: Could not build a list of drivers.\n\nPlease verify your Setup Information File.
3106 Unattended install failure: No ports were detected on your system.
